ZL138B full hydraulic open-air crawler drilling rig is suitable for various rock drill 64-102 mm drill blasting holes, the optimal holes size is 76-89 mm. It’s drilling equipment for water and electricity, railway, traffic, open-air mine, quarry, national defence engineering and various kinds of large construction projects.
Features:
1. ZL138B full hydraulic open-air crawler drilling rig is equipped with DZYG38B type hydraulic rock drill and multidimensional positioning drilling arm
2. High drilling efficiency, 1-1.5 times higher than the same kind of drilling rig;
3. Low energy consumption, lower than the same kind of pneumatic drilling rig 1/3- 2/3;
4. Stoutness structure, compact layout, passing ability, good cross-country performance;
5. Applicability is wide and equipped with all kinds of selected device, can be combined according to the different operation conditions
6. Safety of operation, low dust, low noise.
7. Equipped with automatic protection card brazing equipment
8. With the installation of all-weather operation room and mechanical in brazing
ZL138B full hydraulic open-air drilling rig technical parameters:
64-102mm | |
Economic hole depth | 18m |
Walking speed | 2 Km/h |
Climb capacity | 20° |
Ground clearance | 400mm |
Motor power | 132Kw |
Diesel engine |
|
Capacity | 7 m³/min |
Working pressure | 10mpa |
Dimension |
|
Weight | 12000kg |
Carriage lift angle | up 55° down10° |
Carriage elevation angle | 95° |
Carriage swing angle | Right 15°left 50° |
Rock of hardness | F=6-12 |
Drill arm swing angle | Right 45°left 10° |
Frame Leveling angle | Up 10°down8° |
Push length | 4000mm |
Compensation Length | 1000mm |
Hydraulic rock drill | DZYG38B |
Steel rod | T45×3050mm |
Dust collecting mode | Dry (hydraulic cyclone flow) |
DZYG38B hydraulic rock drill technical parameters:
Weight | 150kg |
Impact pressure | 15-21.5mpa |
Rotating pressure | 10mpa |
Torque (max) | 0-750 N·m |
40-60Hz | |
Rotating speed | 0-300 r/min |
Installed power | 45Kw |